Search
Now showing items 1-8 of 8
Kinematic, dynamic and accuracy reliablity analysis of 6 degree-of-freedom robotic arm
(University of Missouri--Columbia, 2013)
In this article, first of all, it describes the procedure for kinematic and dynamic analysis of a 6-degrees-of-freedom robotic arm. In kinematic analysis, it includes kinematics and differential kinematics. In which, the ...
An investigative approach to explore optimum assembly process design for annular targets carrying leu foil
(University of Missouri--Columbia, 2013)
Technetium-99m is the most widely used nuclear isotope in the medical field, with nearly 80 to 85% of all diagnostic imaging procedures. The daughter isotope of molybdenum-99 is currently produced using weapons-grade ...
Simulation of fuel system with features for controlling air bubble generated for aircraft application
(University of Missouri--Columbia, 2012)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] In this spill tube project an analytical model of the distribution of pressure of the air trapped in the siphoning tube system, where fuel transfer ...
Analysis of dual-phase ejector performance
(University of Missouri--Columbia, 2012)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] An analytical model is proposed to extend the single-phase model for predicting ejector performance, particularly pressure recovery and efficiency, ...
Development of a predictive model for the design of parts fabricated by fused deposition modeling
(University of Missouri--Columbia, 2010)
The prediction of the behavior of parts fabricated by fused deposition modeling (FDM) is an essential part of transitioning the process from rapid prototyping to rapid manufacturing. The overall part strength of an FDM ...
An integrated approach for characterization of properties and mesostructure for FDM Ultem 9085
(University of Missouri--Columbia, 2010)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] The Fused Deposition Modeling (FDM) process is a layered prototyping technique used to build prototypes out of thermoplastic materials. It is currently ...
A comprehensive simulation-based methodology for the design and optimization of orthopaedic internal fixation implants
(University of Missouri--Columbia, 2011)
Internal fixation implants are widely used by orthopaedic surgeons to stabilize various types of fractures in injured patients. However, the irregular geometry of the human skeletal system, as well as the significant ...
Investigation of flow behavior inside ejector pumps using finite difference technique
(University of Missouri--Columbia, 2012)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] A complete numerical model has been developed to characterize the performance under different flow conditions. Finite Difference-based method was used ...