Search
Now showing items 1-20 of 77
Galilean moon tour using simplified trajectory computational techniques
(University of Missouri--Columbia, 2006)
It is desired to find a trajectory for a spacecraft that will capture into an orbit about Jupiter and then subsequently capture into an orbit about each of the Galilean moons. The two main variables are the mass ratio, ...
Theoretical and experimental investigation of oscillating heat pipes
(University of Missouri--Columbia, 2006)
A mathematical model describing the oscillation characteristics of slug flow in a capillary tube is presented. The model considers the vapor bubble as the gas spring for the oscillating motions in a capillary tube including ...
Applying and analyzing robust modern control on uncertain hydraulic systems
(University of Missouri--Columbia, 2006)
In this work modern robust control systems are designed and compared to standard techniques for a hydraulic implement system. The system includes an independent metering valve (IMV) and a variable displacement pump. The ...
Experimental investigation of nanofluid oscillating heat pipes
(University of Missouri--Columbia, 2006)
An experimental investigation was conducted of oscillating heat pipes (OHP) charged with diamond nanofluid. By combining the high thermal conductivity of nanofluids with the high heat transport rate of OHPs, a new type of ...
Modeling, design and control of forced-feedback metering poppet valve system
(University of Missouri--Columbia, 2006)
This research explores valve design, dynamic modeling, and techniques to achieve flow control for a forced-feedback metering poppet valve system. In particular, nonlinear and linear models of a forced feedback configuration ...
Modeling and analysis of nonlinear biological systems
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] This dissertation focuses on the modeling and analysis of a set of biological phenomenon at a cellular (Part I) and systems (Part II) level. In Part ...
Direct contact heat exchanger development
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] The purpose of this work was to develop tools that guide the design of a direct contact heat exchanger for small-scale commercial and/or residential ...
Modeling of selective laser sintering of single-component metal powders
(University of Missouri--Columbia, 2006)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] Selective Laser Sintering (SLS) is a rapid prototyping technology which enables freeform fabrication of complex-geometry components directly from ...
Patient specific bone remodeling and finite element analysis of the lumbar spine
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] The body of work outlined here relates generally to mechanical engineering research in the area of biomechanics. More specifically this work focuses ...
Experimental investigation of a novel disc oscillating heat pipe and heat conduction effect on the startup of oscillating motion
(University of Missouri--Columbia, 2009)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] A new disc oscillating heat pipe has been developed and tested for use in high heat flux applications with a localized heat source. The results show ...
Modeling of thin film evaporation heat transfer and experimental investigation of miniature heat pipes
(University of Missouri--Columbia, 2008)
The heat pipe, as one of the most efficient heat transport devices, is a peerless choice in the electronic cooling field. In order to better understand the heat transfer mechanisms of the heat pipe, a heat transfer model, ...
A comparison of modeling techniques: using the finite element method to determine local displacements in a human hip
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Artificial hip implant surgery is required by approximately 120,000 Americans each year. A typical hip replacement requires the surgical insertion of ...
Characterization of mechanical properties of fused deposition modeling manufactured polycarbonate composites
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] The use of composites in all products - from sporting goods to bridges to satellites - is increasing due to the ability of composite structures to ...
Investigation of static interfacial fracture in orthotropic-orthotropic composite bimaterials using photoelasticity
(University of Missouri--Columbia, 2009)
The effects of static Mode I (opening mode) and mixed-mode (both Mode I - opening mode and Mode II - shear mode present) loading on orthotropic-orthotropic bimaterial interface cracks and isotropic-orthotropic bimaterial ...
Thermal-mechanical analysis of targets for high volume production of molybdenum-99 using low-enriched uranium
(University of Missouri--Columbia, 2009)
Techenetium-99m is diagnostic radioactive medical isotope that is currently used 30,000 times a day in the United States. All supplies of techenetium-99m's parent isotope molybdenum-99 currently originate from nuclear ...
Modeling, verification, optimal design of nonlinear valve spring
(University of Missouri--Columbia, 2009)
The objective of this study is the optimal design of helical spring based on dynamic criteria. The most important dynamic performance criterion of a helical spring is the resonance behavior, including dynamic stress, coil ...
System modeling and control design of a two-stage metering poppet-valve system
(University of Missouri--Columbia, 2006)
The goal of this work is to develop mathematical models, stability criteria, and control designs for a two-stage poppet valve system with a simple back-side pipeline condition that may be used in a valve stack to create ...
Analysis of heat transfer in subcooled metal powder subjected to pulsed laser heating
(University of Missouri--Columbia, 2005)
The interaction of metal powder and pulsed laser heat flux is investigated on two levels, the powder bed level and the particle level. The locations of the thermal penetration depth and the liquid-solid interface are ...
Analysis of lubrication groove geometry
(University of Missouri--Columbia, 2006)
Lubrication is process of using lubricants in moving machine components to reduce friction and wear between them and consequently to improve their running life. In this thesis, a groove is introduced in these components ...
Nonlinear mechanics and testing of highly flexible one-dimensional structures using a camera-based motion analysis system
(University of Missouri--Columbia, 2006)
Both experimental and theoretical investigations are conducted for the dynamics of cables and strings. The exact equations of motion for finite but small amplitude vibration of string were derived based on a fully nonlinear ...