Search
Now showing items 1-5 of 5
Kinematic analysis of cam profiles used in compound bows
(University of Missouri--Columbia, 2009)
for an eccentric-circular cam design and a one-cam one-pulley design. By iteratively determining the bow limb, cam, and cable positions a relationship between the drawn length and drawn force will produce a draw-force curve. In fact, this curve represents...
Investigation of static interfacial fracture in orthotropic-orthotropic composite bimaterials using photoelasticity
(University of Missouri--Columbia, 2009)
The effects of static Mode I (opening mode) and mixed-mode (both Mode I - opening mode and Mode II - shear mode present) loading on orthotropic-orthotropic bimaterial interface cracks and isotropic-orthotropic bimaterial ...
Thermal-mechanical analysis of targets for high volume production of molybdenum-99 using low-enriched uranium
(University of Missouri--Columbia, 2009)
Techenetium-99m is diagnostic radioactive medical isotope that is currently used 30,000 times a day in the United States. All supplies of techenetium-99m's parent isotope molybdenum-99 currently originate from nuclear ...
Modeling, verification, optimal design of nonlinear valve spring
(University of Missouri--Columbia, 2009)
The objective of this study is the optimal design of helical spring based on dynamic criteria. The most important dynamic performance criterion of a helical spring is the resonance behavior, including dynamic stress, coil ...
Modeling tools and prototype design of loop heat pipe for electronics cooling
(University of Missouri--Columbia, 2009)
In this dissertation, a set of modeling tools for loop heat pipe (LHP) design is developed, and original analytical models for annular two-phase flow are proposed. LHPs are promising two-phase thermal transport devices for ...