Search
Now showing items 1-20 of 1806
The engineer becomes a professional manager
(University of Missouri, 1953)
"Today over a third of the management of large industry in America is in the hands of engineers, over a third of mature engineering graduates now find their duties largely managerial in nature, and most engineers have important contacts...
Stability of laminar flow in curved channels
(University of Missouri, 1957)
"Occurrence of secondary flow of a viscous fluid flowing under a pressure gradient in curved channels has often been explained by invoking the existence of boundary layers before the primary flow is established. In this ...
Effect of edge conditions on buckling of stiffened and framed shells
(University of Missouri--Columbia, 1967)
"A series of stiffened shells made of plastic were tested to verify the theoretical equations for the effect of edge conditions on the buckling of stiffened and framed shells. The theory was developed by calculating the deflections during loading...
Applicability of thermoacoustic phenomena to MHD conversion systems
(University of Missouri--Columbia, 1964)
The bandwidth of a single layer absorbing material
(University of Missouri, 1960)
work was done on this structure in which the following special cases were considered: (1) zero magnetic dissipation factor (2) zero electric dissipation factor (3) equal electric and magnetic dissipation factors. For these special cases, methods were...
Measurement of coating thickness by use of pulsed eddy currents
(University of Missouri, 1957)
"The application of pulsed eddy currents to determine the thickness of a metal clad on another is described. The theoretical bases of the method are presented, and the equipment used is described in detail."--Page 1.
Ternary system ethyl alcohol--n--heptane-water at 30 [degrees] CThe rectifying property of polarized barium titanate
(University of Missouri, 1955)
Announcement of the School of Engineering, 1913-1914
(University of Missouri, 1913)
Pulsed eddy currents gage plating thickness
(University of Missouri, 1956)
"Echo-sounding technique making use of pulsed eddy currents determines thickness of one metal coated on a base metal. System takes advantage of electrical dissimilarities and is effective even when both metals are ...
Steady-state waves on transmission lines
(University of Missouri, 1951)
Stresses in a uniformly loaded circular-arc I-beam
(University of Missouri, 1947)
"Expressions are derived by which the stresses may be computed for the case of a uniformly loaded I-beam bent about its minor axis to the form of a circular-arc. This type of structural member is unusual inasmuch as bending ...
A new transit method for realigning railway curves and spirals
(University of Missouri, 1946)
"String lining of curves was used extensively during the depression and the war, partly because of limited engineering personnel and money. Many engineers will prefer the following transit method to string lining, at least on important track...
A system of gaging plating thickness
(University of Missouri, 1959)
Use of the centrifugal governor mechanism as a torsional vibration absorber
(University of Missouri, 1954)
"The centrifugal governor mechanism, suitably modified, is shown to be a practical torsional vibration absorber. Equations for predicting its performance are developed, and comparisons are made with other types of ...
Thermodynamic properties of n-propyl alcohol
(University of Missouri, 1961)
Hydraulic tests of erosion control structures : sliced-inlet type entrance
(University of Missouri, College of Agriculture, Agricultural Experiment Station, 1956)
B-400 : a new, early variety of winter barley for Missouri
(University of Missouri, College of Agriculture, Agricultural Experiment Station, 1952)
Network analyzer measurement of the mesh equivalent of a complex circuit
(University of Missouri, 1959)
Using LP gas as a tractor fuel
(University of Missouri, College of Agriculture, Agricultural Experiment Station, 1954)