Search
Now showing items 1-20 of 334
Analysis and modeling of direct selective laser sintering of two-component metal powders
(University of Missouri--Columbia, 2005)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Direct Selective Laser Sintering (SLS) is an emerging technology of Solid Freeform Fabrication (SFF) that 3-D parts are built from the metal-based ...
Neutron diffraction study of load response and residual stresses in WC-(Ni/Co) composites
(University of Missouri--Columbia, 2005)
The in-situ response of WC-Ni and WC-Co composites under compressive loading was measured using neutron diffraction techniques. These measurements give a clear indication of the elastic strain behavior of both the carbide ...
Electrostatically actuated and bi-stable MEMS structures
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Bistable compliant micro-structures offer a tremendous advantage in the industry today, as these structures have an ability to maintain their shape ...
Patient specific bone remodeling and finite element analysis of the lumbar spine
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] The body of work outlined here relates generally to mechanical engineering research in the area of biomechanics. More specifically this work focuses ...
Theoretial [sic] analysis of oscillating motion, heat transfer, minimum meniscus radius and charging procedure in an oscillating heat pipe
(University of Missouri--Columbia, 2008)
With the rapid development of electronic technology, investigation and application of devices with high performance of heat removal have become competitive issues recently. Different from traditional heat transfer strategy, ...
Modeling and analysis of nonlinear biological systems
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] This dissertation focuses on the modeling and analysis of a set of biological phenomenon at a cellular (Part I) and systems (Part II) level. In Part ...
Direct contact heat exchanger development
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] The purpose of this work was to develop tools that guide the design of a direct contact heat exchanger for small-scale commercial and/or residential ...
Modeling of selective laser sintering of single-component metal powders
(University of Missouri--Columbia, 2006)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] Selective Laser Sintering (SLS) is a rapid prototyping technology which enables freeform fabrication of complex-geometry components directly from ...
Horizontal zinc oxide nanomaterials growth and their application for surface enhanced raman scattering
(University of Missouri--Columbia, 2008)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] Nanonecklace (NNs) or nanochains (NCs), aligned nanoparticles (NPs) in straight or curled shape, have been demonstrated using metals, silicon, silicides, ...
Nanomechanical property characterization of femoral head materials
(University of Missouri--Columbia, 2006)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Orthopedic Implants under long-term physiological loading could produce changes in the surface mechanical properties and possible failure. The knowledge ...
Characterization of drillability of sandwich structure of carbon fiber reinforced epoxy composite over titanium alloy
(University of Missouri--Columbia, 2006)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Composite-over-Titanium structures are the major candidates for substitution of conventional materials in aerospace industries. This paper investigates ...
Investigation of fanless PCs : design and optimization
(University of Missouri--Columbia, 2009)
The purpose of this research is to fundamentally explore the limitations of natural convection as it pertains to the cooling of desktop personal computers (PCs) and, in particular, maximize total thermal loads while ...
Signal processing techniques for nonlinearity identification of structures using transient response
(University of Missouri--Columbia, 2009)
In this work, an alternate method for determining nonlinearity of vibrating structures is investigated. In contrast to previous approaches, transient vibrations have been used in combination with advanced signal processing ...
Modeling, design and control of forced-feedback metering poppet valve system
(University of Missouri--Columbia, 2006)
This research explores valve design, dynamic modeling, and techniques to achieve flow control for a forced-feedback metering poppet valve system. In particular, nonlinear and linear models of a forced feedback configuration ...
A study of parametric excitation applied to a MEMS tuning fork gyroscope
(University of Missouri--Columbia, 2007)
The current MEMS ( gyroscopes which normally use the electro static force to excite the comb drive are faced with the limitations such as low precision, coupling problem, and poor robustness. We propose to use parametric ...
A development of the motile sperm sorting microfluidic devices
(University of Missouri--Columbia, 2007)
The objectives of this research are developing and improving an inexpensive and convenient microfluidic device to apply to sperm cell sorting. Based on well known soft-lithography fabrication method which contains rapid ...
A fault detection scheme for modeled and unmodeled faults in a simple hydraulic actuator system using an extended Kalman filter
(University of Missouri--Columbia, 2006)
In this work an extended Kalman filter (EKF) is used to detect a variety of faults in a simple hydraulic actuator system. Much interest exists in detecting faults in their early stages in the hopes that machine downtime ...
Advanced analysis and design of polymer sheet extrusion
(University of Missouri--Columbia, 2007)
A manufacturing process design methodology is presented which can be used to improve the production of polymer components manufactured via the extrusion. The design methodology employs polymer process modeling, design ...
Comprehensive optimization for thermoelectric refrigeration devices
(University of Missouri--Columbia, 2005)
A large market is currently in place for which thermoelectric (TE) technology can provide diverse energy solutions. This market should continue to grow as improvements are made to TE materials. In the last 10-15 years, ...
X-ray topography techniques for the analysis of laser irradiated silicon
(University of Missouri--Columbia, 2005)
There is currently much interest in femtosecond scale laser interactions with materials. Comparison of the damage produced by the femtosecond laser pulses to the longer laser pulses is also of interest. This study examined ...