Search
Now showing items 41-60 of 334
Rapid industrial furnace thermal modeling for improved fuel efficiency
(University of Missouri--Columbia, 2007)
The development and verification of an innovative modeling technique for industrial gas fired glass melting furnaces will be discussed. Rapid and accurate modeling of industrial furnaces is needed for the development of ...
Nonlinear control and active damping of a forced-feedback metering poppet valve
(University of Missouri--Columbia, 2007)
For a metering poppet valve which was developed at the University of Missouri (MU valve), the valve can be configured for performance at the cost of stability. It is desirable to achieve both performance and stability using ...
Kinematic analysis of cam profiles used in compound bows
(University of Missouri--Columbia, 2009)
The first compound bow was invented in Missouri in 1969. [Allen, 1968] Compound bows are uniquely different from other types of bows in that they use a set of cables, cams and pulley, and two elastic limbs that act as ...
Blackbody temperature calculations from visible and newa-IR spectra for gas-fired furnaces
(University of Missouri--Columbia, 2005)
The goal of this research work is to develop a system capable of measuring multiple factors of interest in the operation of gas-fired furnaces. The primary focus is the development of a model for calculating wall or flame ...
Experimental investigation of nanofluid oscillating heat pipes
(University of Missouri--Columbia, 2006)
An experimental investigation was conducted of oscillating heat pipes (OHP) charged with diamond nanofluid. By combining the high thermal conductivity of nanofluids with the high heat transport rate of OHPs, a new type of ...
Applying and analyzing robust modern control on uncertain hydraulic systems
(University of Missouri--Columbia, 2006)
In this work modern robust control systems are designed and compared to standard techniques for a hydraulic implement system. The system includes an independent metering valve (IMV) and a variable displacement pump. The ...
Galilean moon tour using simplified trajectory computational techniques
(University of Missouri--Columbia, 2006)
It is desired to find a trajectory for a spacecraft that will capture into an orbit about Jupiter and then subsequently capture into an orbit about each of the Galilean moons. The two main variables are the mass ratio, ...
Theoretical and experimental investigation of oscillating heat pipes
(University of Missouri--Columbia, 2006)
A mathematical model describing the oscillation characteristics of slug flow in a capillary tube is presented. The model considers the vapor bubble as the gas spring for the oscillating motions in a capillary tube including ...
A single-sided access simultaneous solution of acoustic wave speed and sample thickness for isotropic materials of plate-type geometry
(University of Missouri--Columbia, 2006)
In ultrasonic nondestructive evaluation, acoustic waves are used to inspect and characterize materials. Two commonly measured parameters are material thickness and acoustic wave speed in the material. These parameters are ...
System modeling and control design of a two-stage metering poppet-valve system
(University of Missouri--Columbia, 2006)
The goal of this work is to develop mathematical models, stability criteria, and control designs for a two-stage poppet valve system with a simple back-side pipeline condition that may be used in a valve stack to create ...
Modern control design for a variable displacement hydraulic pump
(University of Missouri--Columbia, 2006)
In this work modern control methods are used to design and analyze control methods for a variable-displacement hydraulic pump. More accurate uncertainty descriptions are derived by using a structured uncertainty model as ...
Specific bio-modeling and analysis techniques at cellular and systems level
(University of Missouri--Columbia, 2006)
Modeling approaches are developed for two different levels, cellular (Part I) and systems (Part II), and used to develop insights into system performance. PART I consists of three chapters focusing on computational ...
Torque ripple attenuation for an axial piston swash plate type hydrostatic pump: noise considerations
(University of Missouri--Columbia, 2006)
The main goal of this work is to reduce the disturbing noise generated by axial piston swash plate type hydrostatic pumps by attenuating the shaft torque variation. The analysis begins by deriving the equation of the shaft ...
Exploratory development of VARIM process for manufacturing high temperature polymer matrix composites
(University of Missouri--Columbia, 2005)
This research focuses on an exploratory development of vacuum assisted resin infusion molding (VARIM) process for manufacturing high temperature polymer composite materials. High temperature matrix composites are needed ...
Advanced analysis of short-fiber polymer composite material behavior
(University of Missouri--Columbia, 2006)
Short-fiber polymer composites experience widespread use in many industrial applications, where the orientation states of the short-fibers within the polymer matrix define the material properties of the composite structure. ...
Thermal-hydraulic optimization for high production of low-enriched uranium based molybdenum-99
(University of Missouri--Columbia, 2009)
Globally, more than 20 million samples of technetium-99 are used annually to diagnose many different forms of cancer. Despite this, there are only four main nuclear reactors worldwide that produce molybdenum-99, the parent ...
Uneven turns oscillating heat pipes
(University of Missouri--Columbia, 2009)
An experimental investigation on oscillating heat pipes with uneven turns was conducted in order to determine the effect of short turns on the heat transport capability. The shorter turns do not go through both the evaporating ...
Dynamic study of the piezo-driven pipettes in intracytoplasmic sperm injection
(University of Missouri--Columbia, 2008)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] Intracytoplasmic Sperm Injection (ICSI) is regarded as a critical assisted reproductive technology (ART) procedure in which a single spermatozoon is ...
Analysis and optimization of electroformed dendritic structures as enhanced heat transfer surfaces
(University of Missouri--Columbia, 2009)
Over the past several years, the use of passive cooling devices in electronics such as heat pipes and vapor chambers has increased. Due to their more widespread use, these technologies have a high demand for more adaptable ...
Elastic property prediction of long fiber composites using a uniform mesh finite element method
(University of Missouri--Columbia, 2008)
This research numerically evaluates elastic non-isotropic material properties of fiber reinforced composite materials. Calculations are performed with a finite element mesh composed of a uniform array of three dimensional ...