Search
Now showing items 61-80 of 328
Signal processing techniques for nonlinearity identification of structures using transient response
(University of Missouri--Columbia, 2009)
In this work, an alternate method for determining nonlinearity of vibrating structures is investigated. In contrast to previous approaches, transient vibrations have been used in combination with advanced signal processing ...
Characterization of drillability of sandwich structure of carbon fiber reinforced epoxy composite over titanium alloy
(University of Missouri--Columbia, 2006)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Composite-over-Titanium structures are the major candidates for substitution of conventional materials in aerospace industries. This paper investigates ...
Kinematic analysis of cam profiles used in compound bows
(University of Missouri--Columbia, 2009)
The first compound bow was invented in Missouri in 1969. [Allen, 1968] Compound bows are uniquely different from other types of bows in that they use a set of cables, cams and pulley, and two elastic limbs that act as ...
Investigation of fanless PCs : design and optimization
(University of Missouri--Columbia, 2009)
The purpose of this research is to fundamentally explore the limitations of natural convection as it pertains to the cooling of desktop personal computers (PCs) and, in particular, maximize total thermal loads while ...
Analysis and modeling of direct selective laser sintering of two-component metal powders
(University of Missouri--Columbia, 2005)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Direct Selective Laser Sintering (SLS) is an emerging technology of Solid Freeform Fabrication (SFF) that 3-D parts are built from the metal-based ...
A single-sided access simultaneous solution of acoustic wave speed and sample thickness for isotropic materials of plate-type geometry
(University of Missouri--Columbia, 2006)
In ultrasonic nondestructive evaluation, acoustic waves are used to inspect and characterize materials. Two commonly measured parameters are material thickness and acoustic wave speed in the material. These parameters are ...
Applying and analyzing robust modern control on uncertain hydraulic systems
(University of Missouri--Columbia, 2006)
In this work modern robust control systems are designed and compared to standard techniques for a hydraulic implement system. The system includes an independent metering valve (IMV) and a variable displacement pump. The ...
Development of an integrated approach combining artificial neural network material based on modeling with finite element analysis of forming processes
(University of Missouri--Columbia, 2005)
The use of a finite element model for design and analysis of a metal forming processes is limited by the incorporated material model's ability to predict deformation behavior over a wide range of operating conditions. ...
Finite element analysis of residual stress generation during spot welding and its affect on fatigue behavior of spot welded joints
(University of Missouri--Columbia, 2005)
This dissertation presents the finite element based prediction of residual stress generation in a spot welded joint during the spot welding process and the effects of residual stress on fatigue behavior of a spot welded ...
Advanced analysis of short-fiber polymer composite material behavior
(University of Missouri--Columbia, 2006)
Short-fiber polymer composites experience widespread use in many industrial applications, where the orientation states of the short-fibers within the polymer matrix define the material properties of the composite structure. ...
Blackbody temperature calculations from visible and newa-IR spectra for gas-fired furnaces
(University of Missouri--Columbia, 2005)
The goal of this research work is to develop a system capable of measuring multiple factors of interest in the operation of gas-fired furnaces. The primary focus is the development of a model for calculating wall or flame ...
Neutron diffraction study of load response and residual stresses in WC-(Ni/Co) composites
(University of Missouri--Columbia, 2005)
The in-situ response of WC-Ni and WC-Co composites under compressive loading was measured using neutron diffraction techniques. These measurements give a clear indication of the elastic strain behavior of both the carbide ...
Nanomechanical property characterization of femoral head materials
(University of Missouri--Columbia, 2006)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Orthopedic Implants under long-term physiological loading could produce changes in the surface mechanical properties and possible failure. The knowledge ...
Automated trajectory generation and guidance for a new launch vehicle flight phases
(University of Missouri--Columbia, 2010)
Much effort has been put into developing technologies for next generation re-usable launch vehicles. Fully re-usable launch vehicles include a booster stage that is designed to land, usually near the launch site, after it ...
Modeling tools and prototype design of loop heat pipe for electronics cooling
(University of Missouri--Columbia, 2009)
In this dissertation, a set of modeling tools for loop heat pipe (LHP) design is developed, and original analytical models for annular two-phase flow are proposed. LHPs are promising two-phase thermal transport devices for ...
An axisymmetric interfacial tracking model for melting-vaporization-resolidification in a thin metal film irradiated by pico to femtosecond pulse lasers
(University of Missouri--Columbia, 2010)
A two dimensional axisymmetric, interfacial tracking method is developed to model rapid melting and solidification of a free standing metal film subjected to an ultra-short laser pulse. Finite volume method is employed to ...
Thermal-mechanical analysis of targets for high volume production of molybdenum-99 using low-enriched uranium
(University of Missouri--Columbia, 2009)
Techenetium-99m is diagnostic radioactive medical isotope that is currently used 30,000 times a day in the United States. All supplies of techenetium-99m's parent isotope molybdenum-99 currently originate from nuclear ...
An integrated approach for characterization of properties and mesostructure for FDM Ultem 9085
(University of Missouri--Columbia, 2010)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] The Fused Deposition Modeling (FDM) process is a layered prototyping technique used to build prototypes out of thermoplastic materials. It is currently ...
Flight mechanics and control for an unpowered reusable launch vehicle
(University of Missouri--Columbia, 2011)
A new strategy has been developed to aid in allowing a reusable launch vehicle to complete the Trajectory Area Energy Management (TAEM) phase of reentry. Using the new trajectory planning and tracking strategy, the reusable ...
Electron emission thermal energy conversion
(University of Missouri--Columbia, 2010)
Electron emission from a surface can be achieved via two mechanisms: tunneling and thermionics. Converting thermal energy to electrical power using these mechanisms is achieved by generation of an electron current from the ...