Pulse power test stand for water voltage divider calibration [abstract]

MOspace/Manakin Repository

Breadcrumbs Navigation

Pulse power test stand for water voltage divider calibration [abstract]

Please use this identifier to cite or link to this item: http://hdl.handle.net/10355/1521

[+] show full item record


Title: Pulse power test stand for water voltage divider calibration [abstract]
Author: Swarts, Darren
Contributor: University of Missouri-Columbia. Office of Undergraduate Research
Keywords: water resistors
resistive voltage divider monitors
high frequency calibration
Date: 2006
Publisher: University of Missouri - Columbia Office of Undergraduate Research
Abstract: Water resistors are used to dissipate the large amounts of energy produced in high voltage/high current applications over a short period of time. These resistors are frequently used in resistive voltage divider monitors for measuring very high voltages. Accurate calibration of water resistor voltage dividers needs to be done with a very high frequency circuit. A test stand, with known circuit parameters and a pulsed power source, can be used as a high frequency calibration source. The goal of this project is to develop a pulse power test stand and to calibrate water resistor voltage dividers.
URI: http://hdl.handle.net/10355/1521

This item appears in the following Collection(s)

[+] show full item record