Browsing 2007 MU theses - Freely available online by Thesis Department "Mechanical and aerospace engineering (MU)"
Now showing items 1-11 of 11
-
Characterization of mechanical properties and study of microstructures of friction stir welded joints fabricated from similar and dissimilar alloys of aluminum
(University of Missouri--Columbia, 2007)The objective of this research was to characterize the mechanical properties and study the microstructures of the friction stir welded joints to obtain the optimum process conditions that would result in the desired ... -
Design optimization and efficiency modeling of a hot gas vane motor
(University of Missouri--Columbia, 2007)The purpose of this research is to model and analyze the dynamics of a hot gas vane motor for design optimization work. The pneumatic motor is a portable direct drive actuator that is intended as an alternative to ... -
Elastic property prediction of short fiber composites using a uniform mesh finite element method
(University of Missouri--Columbia, 2007)This thesis presents a uniform method to determine the elastic material non-isotropic properties of fiber reinforced composite materials. This method employs a uniform array of custom 3D displacement based elements that ... -
Experimental and numerical investigation of subcritical bifurcations in milling
(University of Missouri--Columbia, 2007)The focus of the current thesis is an experimental and numerical investigation of subcritical bifurcations in milling. More specifically, several researchers have reported results indicating that the secondary Hopf ... -
Failure of transparent polymer composite laminated glass panels under impact loading
(University of Missouri--Columbia, 2007)Historically, windows and other facilities during hurricanes have experienced significant damage exposing the occupants and the building envelope to uncomfortable and dangerous conditions. A new approach to the design of ... -
Helical tool geometry in stability predictions and dynamic modeling of milling
(University of Missouri--Columbia, 2007)The temporal finite element analysis (TFEA) method has been used in several publications to analyze interrupted machining dynamics. In this work, a higher order hp-version TFEA method will be presented which offers the ... -
Investigation into the pool-boiling characteristics of gold nanofluids
(University of Missouri--Columbia, 2007)The use of nanofluids as a heat transfer fluid has drawn considerable attention recently. Within the last five years, work investigating the pool-boiling of these fluids has increased dramatically. However, they have ... -
An investigation of nonlinear tip-sample force models for nanoindentation
(University of Missouri--Columbia, 2007)Current physical models of tip-sample interactions in nanoindentation and atomic force microscopy are exclusively based on either the Johnson-Kendall-Roberts (JKR) or Derjaguin-Muller-Toporov (DMT) models of adhesive contact ... -
Investigation of the "unit cell" concept for air-to-liquid heat exchanger research and development
(University of Missouri--Columbia, 2007)This study investigated the validity of the Unit Cell concept to explore the performance of air-to-liquid heat exchangers. The Unit Cell concept will test only a 15.24 cm by 15.24 cm portion of a full sized prototype coil, ... -
Rapid industrial furnace thermal modeling for improved fuel efficiency
(University of Missouri--Columbia, 2007)The development and verification of an innovative modeling technique for industrial gas fired glass melting furnaces will be discussed. Rapid and accurate modeling of industrial furnaces is needed for the development of ... -
State space formulation of TFEA & uncharted islands of instability in milling
(University of Missouri--Columbia, 2007)A new approach is developed to examine the stability of delay differential equations that builds upon the previous work in temporal finite element analysis. In contrast to the results of previous work, which could only be ...