Search
Now showing items 1-5 of 5
System modeling and control design of a two-stage metering poppet-valve system
(University of Missouri--Columbia, 2006)
control methods that comprise modified PI control, LQG control, H [mobius] control, and nonlinear feedback control are used to make a closed-loop poppet system. The nonlinear controller is only applied to the nonlinear system and certified by Lyapunov...
Sensitivity analysis and optimal design of conventional and magnnetorheological fluid brakes
(University of Missouri--Columbia, 2018)
Mechanical and electrical brakes have dominated the braking industry for many years and will most likely continue to do so for the foreseeable future due to their low cost and adequate operating performance, wide range of ...
Using feedback linearization to alter the performance of multiple linear hydraulic-actuators powered by the same pump
(University of Missouri--Columbia, 2020)
-actuators with both actuators being powered by the same pump. This research uses two open-centered 4-way valves to control the displacement of the two hydraulic actuators for a wheel loader implement system, based upon an input command from the operator who is modeled...
Modeling the inertial torque imbalance and foundation forces within an inline internal combustion engine : quantifying the equivalent mass approximation
(University of Missouri--Columbia, 2018)
single-piston engine. The next largest foundation forces are exhibited by a 2-piston engine, followed by a 3e-piston engine, and that a dramatic reduction in the foundation forces and torque imbalance may be obtained by using 4 or more pistons...
A new lumped parameter model for coronary blood flow, using nondimensional analysis
(University of Missouri--Columbia, 2019)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] The studies of the coronary circulation hemodynamics are of great importance due to the high mortality and morbidity associated with coronary diseases. ...