Search
Now showing items 1-9 of 9
Conservation and allocation of slope in gravity sanitary sewer design
(University of Missouri--Columbia, 2010)
constraints throughout each route. The methodology was tested in an undeveloped area near Ashland, Missouri to simulate a new development. Two pairs of baseline and slope conserving routes were evaluated, and the slope-conserving routes were found to require...
Analysis and design of reinforced concrete wall systems for blast
(University of Missouri--Columbia, 2018)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Building envelope is the first and most critical line of defense for a structure against external explosion. Building envelope can be divided into two categories; structural...
Modeling pedestrian crash severity in St. Louis using random forests and mixed logit techniques
(University of Missouri--Columbia, 2019)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI--COLUMBIA AT REQUEST OF AUTHOR.] The pedestrian-vehicle crashes in the City of St. Louis is a major concern due to the high magnitude of injuries and fatalities compared to Missouri's statewide...
Numerical investigation of load transfer mechanisms in slopes reinforced with piles
(University of Missouri--Columbia, 2005)
The objective of the work is to use numerical analyses to evaluate the limit soil pressure on piles, to evaluate the load transfer mechanism, and to evaluate alternative means for estimating mobilized and limit loads on ...
Comparative study of type 2 median crossovers and median u-turns
(University of Missouri--Columbia, 2008)
Many states use rural expressway median crossovers which provide for separation between the two opposing traffic lanes to manage the direct left turn movements between the expressways and cross roads. As the volume increases ...
Organic-inorganic hybrid materials for arsenic adsorption : surface complexation and intraparticle diffusion
(University of Missouri--Columbia, 2020)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] Arsenic removal through adsorption is one of the most widely applied techniques for arsenic removal from drinking water. Among the numerous arsenic adsorbents that have been...
Monitoring of an urban level spreader as part of the collaborative adaptive management process
(University of Missouri--Columbia, 2020)
Irregular flows, such as the high flows caused by stormwater runoff after a rain event are a major cause of stream impairment in urbanized watersheds. The Hinkson Creek CAM (Collaborative Adaptive Management) approach is ...
Statistical and simulation methods for evaluating stationary and mobile work zone impacts
(University of Missouri--Columbia, 2018)
and almost no quantitative study assessing MWZ safety impact. Using Missouri data, this study introduces 20 new crash prediction models for SWZs on freeways, expressways, rural two lane highways, urban multi-lane highways, arterials, ramps, signalized...
Load and resistance factor design of drilled shafts subjected to lateral loading at service limit state
(University of Missouri--Columbia, 2018)
Since 2007, the American Association of State Highway Administration Officials (AASHTO) has made utilization of Load and Resistance Factor Design (LRFD) mandatory on all federally-funded new bridge projects (AASHTO, 2007). ...