Search
Now showing items 1-20 of 77
Design optimization and efficiency modeling of a hot gas vane motor
(University of Missouri--Columbia, 2007)
The purpose of this research is to model and analyze the dynamics of a hot gas vane motor for design optimization work. The pneumatic motor is a portable direct drive actuator that is intended as an alternative to ...
Characterization of mechanical properties and study of microstructures of friction stir welded joints fabricated from similar and dissimilar alloys of aluminum
(University of Missouri--Columbia, 2007)
The objective of this research was to characterize the mechanical properties and study the microstructures of the friction stir welded joints to obtain the optimum process conditions that would result in the desired ...
Investigation of the "unit cell" concept for air-to-liquid heat exchanger research and development
(University of Missouri--Columbia, 2007)
This study investigated the validity of the Unit Cell concept to explore the performance of air-to-liquid heat exchangers. The Unit Cell concept will test only a 15.24 cm by 15.24 cm portion of a full sized prototype coil, ...
An investigation of nonlinear tip-sample force models for nanoindentation
(University of Missouri--Columbia, 2007)
Current physical models of tip-sample interactions in nanoindentation and atomic force microscopy are exclusively based on either the Johnson-Kendall-Roberts (JKR) or Derjaguin-Muller-Toporov (DMT) models of adhesive contact ...
Experimental and numerical investigation of subcritical bifurcations in milling
(University of Missouri--Columbia, 2007)
The focus of the current thesis is an experimental and numerical investigation of subcritical bifurcations in milling. More specifically, several researchers have reported results indicating that the secondary Hopf ...
Elastic property prediction of short fiber composites using a uniform mesh finite element method
(University of Missouri--Columbia, 2007)
This thesis presents a uniform method to determine the elastic material non-isotropic properties of fiber reinforced composite materials. This method employs a uniform array of custom 3D displacement based elements that ...
Rapid industrial furnace thermal modeling for improved fuel efficiency
(University of Missouri--Columbia, 2007)
The development and verification of an innovative modeling technique for industrial gas fired glass melting furnaces will be discussed. Rapid and accurate modeling of industrial furnaces is needed for the development of ...
Helical tool geometry in stability predictions and dynamic modeling of milling
(University of Missouri--Columbia, 2007)
The temporal finite element analysis (TFEA) method has been used in several publications to analyze interrupted machining dynamics. In this work, a higher order hp-version TFEA method will be presented which offers the ...
Investigation of static interfacial fracture in orthotropic-orthotropic composite bimaterials using photoelasticity
(University of Missouri--Columbia, 2009)
The effects of static Mode I (opening mode) and mixed-mode (both Mode I - opening mode and Mode II - shear mode present) loading on orthotropic-orthotropic bimaterial interface cracks and isotropic-orthotropic bimaterial ...
Thermal-mechanical analysis of targets for high volume production of molybdenum-99 using low-enriched uranium
(University of Missouri--Columbia, 2009)
Techenetium-99m is diagnostic radioactive medical isotope that is currently used 30,000 times a day in the United States. All supplies of techenetium-99m's parent isotope molybdenum-99 currently originate from nuclear ...
Modeling, verification, optimal design of nonlinear valve spring
(University of Missouri--Columbia, 2009)
The objective of this study is the optimal design of helical spring based on dynamic criteria. The most important dynamic performance criterion of a helical spring is the resonance behavior, including dynamic stress, coil ...
Mechanical and thermal buckling of thin films
(University of Missouri--Columbia, 2005)
Devices with feature size on the order of one micrometer have found widespread applications in science and engineering. MEMS, is a rapidly growing technology for the fabrication of miniature devices which provides a way ...
Analysis of heat transfer in subcooled metal powder subjected to pulsed laser heating
(University of Missouri--Columbia, 2005)
The interaction of metal powder and pulsed laser heat flux is investigated on two levels, the powder bed level and the particle level. The locations of the thermal penetration depth and the liquid-solid interface are ...
Advanced analysis and design of polymer sheet extrusion
(University of Missouri--Columbia, 2007)
A manufacturing process design methodology is presented which can be used to improve the production of polymer components manufactured via the extrusion. The design methodology employs polymer process modeling, design ...
System modeling and control design of a two-stage metering poppet-valve system
(University of Missouri--Columbia, 2006)
The goal of this work is to develop mathematical models, stability criteria, and control designs for a two-stage poppet valve system with a simple back-side pipeline condition that may be used in a valve stack to create ...
Nonlinear mechanics and testing of highly flexible one-dimensional structures using a camera-based motion analysis system
(University of Missouri--Columbia, 2006)
Both experimental and theoretical investigations are conducted for the dynamics of cables and strings. The exact equations of motion for finite but small amplitude vibration of string were derived based on a fully nonlinear ...
Torque ripple attenuation for an axial piston swash plate type hydrostatic pump: noise considerations
(University of Missouri--Columbia, 2006)
The main goal of this work is to reduce the disturbing noise generated by axial piston swash plate type hydrostatic pumps by attenuating the shaft torque variation. The analysis begins by deriving the equation of the shaft ...
Analysis of lubrication groove geometry
(University of Missouri--Columbia, 2006)
Lubrication is process of using lubricants in moving machine components to reduce friction and wear between them and consequently to improve their running life. In this thesis, a groove is introduced in these components ...
Comprehensive optimization for thermoelectric refrigeration devices
(University of Missouri--Columbia, 2005)
A large market is currently in place for which thermoelectric (TE) technology can provide diverse energy solutions. This market should continue to grow as improvements are made to TE materials. In the last 10-15 years, ...
X-ray topography techniques for the analysis of laser irradiated silicon
(University of Missouri--Columbia, 2005)
There is currently much interest in femtosecond scale laser interactions with materials. Comparison of the damage produced by the femtosecond laser pulses to the longer laser pulses is also of interest. This study examined ...