Search
Now showing items 1-20 of 59
High strain properties of advanced high strength spot welded steels
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] This research was conducted to investigate and characterize the high strain rate compressive loading behavior of DP600 GI, an advanced high strength ...
4D printing of stimulus-responsive polymeric materials
(University of Missouri--Columbia, 2017)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] Rising beyond 3D printing techniques, 4D printing can fabricate complex structures with inks made of stimulus-responsive polymeric materials. Thus, after printed...
Investigation of static interfacial fracture in orthotropic-orthotropic composite bimaterials using photoelasticity
(University of Missouri--Columbia, 2009)
The effects of static Mode I (opening mode) and mixed-mode (both Mode I - opening mode and Mode II - shear mode present) loading on orthotropic-orthotropic bimaterial interface cracks and isotropic-orthotropic bimaterial ...
Analysis and modeling of direct selective laser sintering of two-component metal powders
(University of Missouri--Columbia, 2005)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Direct Selective Laser Sintering (SLS) is an emerging technology of Solid Freeform Fabrication (SFF) that 3-D parts are built from the metal-based ...
A development of the motile sperm sorting microfluidic devices
(University of Missouri--Columbia, 2007)
The objectives of this research are developing and improving an inexpensive and convenient microfluidic device to apply to sperm cell sorting. Based on well known soft-lithography fabrication method which contains rapid ...
Helical tool geometry in stability predictions and dynamic modeling of milling
(University of Missouri--Columbia, 2007)
in an effort to validate TFEA results for machining Ti6Al4V using a helical tool....
Local free convection to non-Newtonian fluids from a horizontal, isothermal cylinder
(University of Missouri--Columbia, 1972)
The transfer of heat between a body surface and the motionless fluid surrounding it is perhaps one of the most naturally occurring physical phenomena. Undoubtedly interest and speculation regarding this natural or free ...
3D polymeric scaffolds towards biomedical applications
(University of Missouri--Columbia, 2020)
, the assembly operation requires complicated actuation equipment and the assembled scaffolds are usually tethered on cumbersome elastomeric substrates. (3) For printing, few of scaffolds fabricated by emerging 4D printing technologies are responsive...
Analytical earth-aerocapture guidance
(University of Missouri--Columbia, 2020)
Aerocapture is a technique of employing a single atmospheric pass to inserts a spacecraft from a hyperbolic orbit, approaching from deep space, into an elliptical (captured) orbit around its destination planet. After ...
Semi-analytical terminal and automatic approach and landing trajectory planners for unpowered reusable launch vehicle
(University of Missouri--Columbia, 2019)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] A new guidance scheme for the terminal area energy management (TAEM) phase of an unpowered reusable launch vehicle (RLV) has been developed. The main ...
Force system synthesis to produce a desired time response of mechanisms
(University of Missouri--Columbia, 1975)
A technique and computer programs are developed which will synthesize parameters of force systems which will drive a mechanism to have a desired motion-time response and desired input-output forces. The force devices can ...
An investigation into thermoelectric coolers
(University of Missouri--Columbia, 2018)
A thermoelectric cooler (TEC) is a type of cooler that uses the electricity between the junction of two materials to cause a temperature drop. These coolers operate using the Peltier effect. Effectively, a TEC uses electrical ...
Design and analysis of origami-inspired structures
(University of Missouri--Columbia, 2022)
This work focuses on creating novel structures by combining elements of common origami patterns. Multiple different types of physical and computer models are implemented to represent and analyze the structures. These ...
Numerical and experimental investigations on capillary-driven thin-film evaporation with applications in pumped two-phase loop and loop thermosyphon
(University of Missouri--Columbia, 2020)
and tubular wick posts. The evaporation mode transition from flooded to thin-film evaporation was detected by the evaporator thermal resistance which is directly related with the liquid level in the monolayer wick base. In Chapter 4, an active flow control...
Effect of chip thickness, sub-critical bifurcations and process parameters in high-speed milling
(University of Missouri--Columbia, 2010)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] The main focus of the current research is to experimentally and numerically investigate of subcritical bifurcations in milling accounting for actual ...
System modeling and control design of a two-stage metering poppet-valve system
(University of Missouri--Columbia, 2006)
control methods that comprise modified PI control, LQG control, H [mobius] control, and nonlinear feedback control are used to make a closed-loop poppet system. The nonlinear controller is only applied to the nonlinear system and certified by Lyapunov...
Automated trajectory generation and guidance for a new launch vehicle flight phases
(University of Missouri--Columbia, 2010)
Much effort has been put into developing technologies for next generation re-usable launch vehicles. Fully re-usable launch vehicles include a booster stage that is designed to land, usually near the launch site, after it ...
Investigation of fanless PCs : design and optimization
(University of Missouri--Columbia, 2009)
The purpose of this research is to fundamentally explore the limitations of natural convection as it pertains to the cooling of desktop personal computers (PCs) and, in particular, maximize total thermal loads while ...
Nonlinear mechanics and testing of highly flexible one-dimensional structures using a camera-based motion analysis system
(University of Missouri--Columbia, 2006)
Both experimental and theoretical investigations are conducted for the dynamics of cables and strings. The exact equations of motion for finite but small amplitude vibration of string were derived based on a fully nonlinear ...
X-ray topography techniques for the analysis of laser irradiated silicon
(University of Missouri--Columbia, 2005)
There is currently much interest in femtosecond scale laser interactions with materials. Comparison of the damage produced by the femtosecond laser pulses to the longer laser pulses is also of interest. This study examined ...