Search
Now showing items 1-20 of 77
Development of a two-dimensional human thermal model for EVA applications
(University of Missouri-Columbia, 2002)
The human thermoregulatory system, with its active and passive components, is difficult to model due to nonlinearities, complex interactions, and a lack of understanding of many of the active thermoregulatory mechanisms. ...
Thermal-hydraulic optimization for high production of low-enriched uranium based molybdenum-99
(University of Missouri--Columbia, 2009)
Globally, more than 20 million samples of technetium-99 are used annually to diagnose many different forms of cancer. Despite this, there are only four main nuclear reactors worldwide that produce molybdenum-99, the parent ...
Horizontal zinc oxide nanomaterials growth and their application for surface enhanced raman scattering
(University of Missouri--Columbia, 2008)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] Nanonecklace (NNs) or nanochains (NCs), aligned nanoparticles (NPs) in straight or curled shape, have been demonstrated using metals, silicon, silicides, ...
Advanced analysis and design of polymer sheet extrusion
(University of Missouri--Columbia, 2007)
A manufacturing process design methodology is presented which can be used to improve the production of polymer components manufactured via the extrusion. The design methodology employs polymer process modeling, design ...
Neutron diffraction study of load response and residual stresses in WC-(Ni/Co) composites
(University of Missouri--Columbia, 2005)
The in-situ response of WC-Ni and WC-Co composites under compressive loading was measured using neutron diffraction techniques. These measurements give a clear indication of the elastic strain behavior of both the carbide ...
Forced convection in nanofluids over a flat plate
(University of Missouri--Columbia, 2008)
This work analyzes the characteristics, flow development, and heat transfer coefficient of nanofluids under laminar forced convection over a flat plate. Nanofluids are engineered colloids composed of a base fluid and ...
Analysis and optimization of electroformed dendritic structures as enhanced heat transfer surfaces
(University of Missouri--Columbia, 2009)
Over the past several years, the use of passive cooling devices in electronics such as heat pipes and vapor chambers has increased. Due to their more widespread use, these technologies have a high demand for more adaptable ...
Signal processing techniques for nonlinearity identification of structures using transient response
(University of Missouri--Columbia, 2009)
In this work, an alternate method for determining nonlinearity of vibrating structures is investigated. In contrast to previous approaches, transient vibrations have been used in combination with advanced signal processing ...
A fault detection scheme for modeled and unmodeled faults in a simple hydraulic actuator system using an extended Kalman filter
(University of Missouri--Columbia, 2006)
In this work an extended Kalman filter (EKF) is used to detect a variety of faults in a simple hydraulic actuator system. Much interest exists in detecting faults in their early stages in the hopes that machine downtime ...
Uneven turns oscillating heat pipes
(University of Missouri--Columbia, 2009)
An experimental investigation on oscillating heat pipes with uneven turns was conducted in order to determine the effect of short turns on the heat transport capability. The shorter turns do not go through both the evaporating ...
Modern control design for a variable displacement hydraulic pump
(University of Missouri--Columbia, 2006)
In this work modern control methods are used to design and analyze control methods for a variable-displacement hydraulic pump. More accurate uncertainty descriptions are derived by using a structured uncertainty model as ...
Advanced guidance algorithms for the Ares V cargo launch vehicle
(University of Missouri--Columbia, 2008)
Launch ascent guidance is an area that routinely involves applications of optimization tools and optimal control theory. The vacuum ascent trajectory problem has been formulated as a two-point boundary-value problem with ...
A generalized approach for calculation of the eigenvector sensitivity for various eigenvector normalizations
(University of Missouri--Columbia, 2005)
Sensitivity analysis is an important step in any gradient based optimization problem. Eigenvalue and Eigenvector Sensitivity Analysis has been a major area for more than three decades in structural optimization. An efficient ...
Kinematic analysis of cam profiles used in compound bows
(University of Missouri--Columbia, 2009)
The first compound bow was invented in Missouri in 1969. [Allen, 1968] Compound bows are uniquely different from other types of bows in that they use a set of cables, cams and pulley, and two elastic limbs that act as ...
Nanomechanical property characterization of femoral head materials
(University of Missouri--Columbia, 2006)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Orthopedic Implants under long-term physiological loading could produce changes in the surface mechanical properties and possible failure. The knowledge ...
Electrostatically actuated and bi-stable MEMS structures
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Bistable compliant micro-structures offer a tremendous advantage in the industry today, as these structures have an ability to maintain their shape ...
Analysis of lubrication groove geometry
(University of Missouri--Columbia, 2006)
Lubrication is process of using lubricants in moving machine components to reduce friction and wear between them and consequently to improve their running life. In this thesis, a groove is introduced in these components ...
Mechanical and thermal buckling of thin films
(University of Missouri--Columbia, 2005)
Devices with feature size on the order of one micrometer have found widespread applications in science and engineering. MEMS, is a rapidly growing technology for the fabrication of miniature devices which provides a way ...
Analysis of heat transfer in subcooled metal powder subjected to pulsed laser heating
(University of Missouri--Columbia, 2005)
The interaction of metal powder and pulsed laser heat flux is investigated on two levels, the powder bed level and the particle level. The locations of the thermal penetration depth and the liquid-solid interface are ...
Investigation into the pool-boiling characteristics of gold nanofluids
(University of Missouri--Columbia, 2007)
The use of nanofluids as a heat transfer fluid has drawn considerable attention recently. Within the last five years, work investigating the pool-boiling of these fluids has increased dramatically. However, they have ...