Search
Now showing items 1-20 of 43
Effects of deceptive behavior on biomechanical measures of standing posture
(University of Missouri--Kansas City, 2012-06-22)
The accurate detection of deception has potential applications in many fields including credibility assessment, security screening, homeland security, and counter-terrorism. Techniques currently used for deception detection ...
Validation of a Subject Specific Canine Hind Limb Model with Emphasis on an Anatomical Stifle
(University of Missouri--Kansas City, 2010)
The objective of this study was to validate a subject specific multibody limb level model of a canine hind limb and incorporate joint level modeling techniques to include an anatomically correct stifle. Experimental testing ...
Development of Multibody Soft Tissue Models and Their Tuning to Experimental Data: With a Focus in the Canine Meniscus
(University of Missouri--Kansas City, 2010)
This study explores the application of multibody modeling techniques in an attempt to capture the flexible behavior of biological tissues inside of a rigid body mechanics software. To accomplish this, segmented multibody ...
Optimization of the slag tap for the gasification of sustainable feedstocks
(University of Missouri--Kansas City, 2012-01-17)
The objective of this study was to optimize a slag tapping block for use with a
molten slag bath containing slag from the gasification of biomass and municipal solid
waste feedstocks. Theoretical testing was conducted ...
Optimization of ligament parameters on a subject-specific computational human knee model in a dynamic knee simulator using design of experiments
(University of Missouri-Kansas City, 2011-12-09)
The objective of this study was to optimize ligament parameters used in a dynamic three dimensional
subject-specific computational knee model. The parameters of interest are the zero
load length (lambda sub zero), stiffness ...
Biomechanical characterization of slipping on pervious and traditional concrete walking surfaces
(University of Missouri--Kansas City, 2012-06-22)
Pervious concrete is a porous material that may provide superior slip resistance due to its ability to exfiltrate melted ice and other slippery surface contaminants. The purpose of this study was to analyze slip-related ...
Development and validation of a computational multibody model of the elbow joint
(2014-03-25)
Computational multibody models of the elbow joint can provide a powerful tool to study joint biomechanics, examine muscle and ligament function, soft tissue loading, and the effects of joint trauma. Such models can reduce ...
Derivation of walk-in cooler and freezer Performance Standard equations as they pertain to the ANSI/AHRI Standard 1250 and 1251
(University of Missouri--Kansas City, 2012)
The ANSI/AHRI (American National Standard Institute (ANSI)/ Air-Conditioning, Heating, and Refrigeration Institute (AHRI).) Standard 1250/1251 Performance Rating of Walk-In Coolers and Freezers strives to standardize ...
Use of Biomechanical Motion Analysis to Evaluate Endotracheal Intubation Skill in a Simulated Clinical Setting
(2015)
This study evaluated, using motion capture technology, the performance characteristics of
novice and experienced medical personnel performing endotracheal intubation in a simulated
clinical setting. Few objective measures ...
Osteocyte mechanotransduction: changes with age - a parametric finite element study
(2013)
The nature of bone is to adapt its structure in response to mechanical loading. When the bone is loaded, it is remodeled to be able to support the increased loads. Bone resorption can occur resulting in bone loss from lack ...
Strain Gauge Utilization for Aerial Vehicle Dynamic Load Measurement
(2016)
The strain gauge is a commonly used tool for dynamic load and strain measurement of a system. The work presented in this thesis describes the development and evaluation of strain gauges applied to both an aerodynamic ...
Overcoming the Challenges of Using Unmanned Aircraft for Bridge Inspections
(2016)
Applications for small unmanned aerial vehicles have exploded over the past
decade. Small size, maneuverability, low cost, and versatility enable utilization for applications
not readily accessible by traditional manned ...
Investigating the Link Between Mechanics and Bone: A Local Approach to a Multi-Scale System
(2016)
Bone,the organic material which skeletons are comprised of, allows all species of
vertebrates to support themselves against the forces of gravity, engage in locomotion,protect soft internal organs, and a wide variety of ...
Simulation and Experimental Testing of Additively Manufactured Strain Gauges
(University of Missouri--Kansas City, 2017)
Additive manufacturing has seen a rapid increase as a method of fabricating both
design phase prototypes and end-user products. The increase in development of the technology has driven the development of new products such ...
Machine Learning based Predictive Modeling of Stochastic Systems
(2023)
Complex signals are ubiquitous in our daily lives, and interpreting and modeling them is vital for scientific advancement. Traditional methods for predictive modeling of complex signals include statistical signal processing ...
A Multimodal Biometric Authentication for Smartphones
(University of Missouri–Kansas City, 2015)
Biometrics is seen as a viable solution to ageing password based authentication on smartphones. Fingerprint biometric is leading the biometric technology for smartphones, however, owing to its high cost, major players in ...
Development and Testing of a Steerable Cruciform Parachute System
(University of Missouri--Kansas City, 2018)
This thesis focuses on the development of a parachute payload system which is
capable of precision aerial delivery yet only represents a modest cost increase over ballistic unguided systems. In order to develop such a ...
Development and Viability of an Inverted Descent Quadrotor for Precision Aerial Delivery
(2021)
The field of Precision Aerial Delivery strives for the highest standard of accuracy, with sights set on delivering payloads from high altitudes to mere feet from goal locations. Quadrotors, due to high maneuverability and ...
Interfacial self-assemblies of surfactants at water-oil interfaces
(2021)
The generation of novel synthetic materials with functionality and hierarchical ordering is a major focus of current studies in materials science and engineering. Self-assembling amphiphilic materials (such as lipids or ...
Heat Transfer Enhancement of Phase Change Materials for Thermal Energy Storage Systems
(University of Missouri -- Kansas City, 2019)
In recent studies, the energy storage capability of phase change materials
(PCMs) in thermal energy storage systems, such as in the case of solar water
heaters has attracted many attentions; however, PCMs may not be fully ...