Search
Now showing items 1-20 of 25
Advanced analysis and design of polymer sheet extrusion
(University of Missouri--Columbia, 2007)
A manufacturing process design methodology is presented which can be used to improve the production of polymer components manufactured via the extrusion. The design methodology employs polymer process modeling, design ...
A study of parametric excitation applied to a MEMS tuning fork gyroscope
(University of Missouri--Columbia, 2007)
The current MEMS ( gyroscopes which normally use the electro static force to excite the comb drive are faced with the limitations such as low precision, coupling problem, and poor robustness. We propose to use parametric ...
Nonlinear control and active damping of a forced-feedback metering poppet valve
(University of Missouri--Columbia, 2007)
For a metering poppet valve which was developed at the University of Missouri (MU valve), the valve can be configured for performance at the cost of stability. It is desirable to achieve both performance and stability using ...
Characterization of mechanical properties and study of microstructures of friction stir welded joints fabricated from similar and dissimilar alloys of aluminum
(University of Missouri--Columbia, 2007)
The objective of this research was to characterize the mechanical properties and study the microstructures of the friction stir welded joints to obtain the optimum process conditions that would result in the desired ...
State space formulation of TFEA & uncharted islands of instability in milling
(University of Missouri--Columbia, 2007)
A new approach is developed to examine the stability of delay differential equations that builds upon the previous work in temporal finite element analysis. In contrast to the results of previous work, which could only be ...
Failure of transparent polymer composite laminated glass panels under impact loading
(University of Missouri--Columbia, 2007)
Historically, windows and other facilities during hurricanes have experienced significant damage exposing the occupants and the building envelope to uncomfortable and dangerous conditions. A new approach to the design of ...
Parametric and optimal design of modular machine tools
(University of Missouri--Columbia, 2007)
Over the years machine tools for manufacturing have developed into two classes. One is the general purpose machine tools, and the other is designed for machining large quantities of a specific part or process. These ...
Development of tailored preform processing technology for net-shape manufacturing of large monolithic structures
(University of Missouri--Columbia, 2007)
The aim of the present research effort involves exploration of a new processing approach, "Tailored Preform Processing (TPP)" technology for net-shape manufacturing of monolithic structures for the transportation industry. ...
Investigation into the pool-boiling characteristics of gold nanofluids
(University of Missouri--Columbia, 2007)
The use of nanofluids as a heat transfer fluid has drawn considerable attention recently. Within the last five years, work investigating the pool-boiling of these fluids has increased dramatically. However, they have ...
Experimental and analytical study on two-phase impingement cooling with and without electric field
(University of Missouri--Columbia, 2007)
Among the thermal management solutions for power electronics, two-phase jet or spray impingement cooling are two promising candidates. In this study, electrohydrodynamic atomization (EHDA) method is used to generate spray ...
High strain properties of advanced high strength spot welded steels
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] This research was conducted to investigate and characterize the high strain rate compressive loading behavior of DP600 GI, an advanced high strength ...
A comparison of modeling techniques: using the finite element method to determine local displacements in a human hip
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Artificial hip implant surgery is required by approximately 120,000 Americans each year. A typical hip replacement requires the surgical insertion of ...
Characterization of mechanical properties of fused deposition modeling manufactured polycarbonate composites
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] The use of composites in all products - from sporting goods to bridges to satellites - is increasing due to the ability of composite structures to ...
Electrostatically actuated and bi-stable MEMS structures
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Bistable compliant micro-structures offer a tremendous advantage in the industry today, as these structures have an ability to maintain their shape ...
Patient specific bone remodeling and finite element analysis of the lumbar spine
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] The body of work outlined here relates generally to mechanical engineering research in the area of biomechanics. More specifically this work focuses ...
A development of the motile sperm sorting microfluidic devices
(University of Missouri--Columbia, 2007)
The objectives of this research are developing and improving an inexpensive and convenient microfluidic device to apply to sperm cell sorting. Based on well known soft-lithography fabrication method which contains rapid ...
Direct contact heat exchanger development
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] The purpose of this work was to develop tools that guide the design of a direct contact heat exchanger for small-scale commercial and/or residential ...
Modeling and analysis of nonlinear biological systems
(University of Missouri--Columbia, 2007)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] This dissertation focuses on the modeling and analysis of a set of biological phenomenon at a cellular (Part I) and systems (Part II) level. In Part ...
Helical tool geometry in stability predictions and dynamic modeling of milling
(University of Missouri--Columbia, 2007)
The temporal finite element analysis (TFEA) method has been used in several publications to analyze interrupted machining dynamics. In this work, a higher order hp-version TFEA method will be presented which offers the ...
Experimental and numerical investigation of subcritical bifurcations in milling
(University of Missouri--Columbia, 2007)
The focus of the current thesis is an experimental and numerical investigation of subcritical bifurcations in milling. More specifically, several researchers have reported results indicating that the secondary Hopf ...