Search
Now showing items 61-77 of 77
Specific bio-modeling and analysis techniques at cellular and systems level
(University of Missouri--Columbia, 2006)
Modeling approaches are developed for two different levels, cellular (Part I) and systems (Part II), and used to develop insights into system performance. PART I consists of three chapters focusing on computational ...
Exploratory development of VARIM process for manufacturing high temperature polymer matrix composites
(University of Missouri--Columbia, 2005)
This research focuses on an exploratory development of vacuum assisted resin infusion molding (VARIM) process for manufacturing high temperature polymer composite materials. High temperature matrix composites are needed ...
A study of parametric excitation applied to a MEMS tuning fork gyroscope
(University of Missouri--Columbia, 2007)
The current MEMS ( gyroscopes which normally use the electro static force to excite the comb drive are faced with the limitations such as low precision, coupling problem, and poor robustness. We propose to use parametric ...
Modeling, design and control of forced-feedback metering poppet valve system
(University of Missouri--Columbia, 2006)
This research explores valve design, dynamic modeling, and techniques to achieve flow control for a forced-feedback metering poppet valve system. In particular, nonlinear and linear models of a forced feedback configuration ...
A single-sided access simultaneous solution of acoustic wave speed and sample thickness for isotropic materials of plate-type geometry
(University of Missouri--Columbia, 2006)
In ultrasonic nondestructive evaluation, acoustic waves are used to inspect and characterize materials. Two commonly measured parameters are material thickness and acoustic wave speed in the material. These parameters are ...
Galilean moon tour using simplified trajectory computational techniques
(University of Missouri--Columbia, 2006)
It is desired to find a trajectory for a spacecraft that will capture into an orbit about Jupiter and then subsequently capture into an orbit about each of the Galilean moons. The two main variables are the mass ratio, ...
Theoretical and experimental investigation of oscillating heat pipes
(University of Missouri--Columbia, 2006)
A mathematical model describing the oscillation characteristics of slug flow in a capillary tube is presented. The model considers the vapor bubble as the gas spring for the oscillating motions in a capillary tube including ...
Experimental investigation of nanofluid oscillating heat pipes
(University of Missouri--Columbia, 2006)
An experimental investigation was conducted of oscillating heat pipes (OHP) charged with diamond nanofluid. By combining the high thermal conductivity of nanofluids with the high heat transport rate of OHPs, a new type of ...
Modern control design for a variable displacement hydraulic pump
(University of Missouri--Columbia, 2006)
In this work modern control methods are used to design and analyze control methods for a variable-displacement hydraulic pump. More accurate uncertainty descriptions are derived by using a structured uncertainty model as ...
A fault detection scheme for modeled and unmodeled faults in a simple hydraulic actuator system using an extended Kalman filter
(University of Missouri--Columbia, 2006)
In this work an extended Kalman filter (EKF) is used to detect a variety of faults in a simple hydraulic actuator system. Much interest exists in detecting faults in their early stages in the hopes that machine downtime ...
System modeling and control design of a two-stage metering poppet-valve system
(University of Missouri--Columbia, 2006)
The goal of this work is to develop mathematical models, stability criteria, and control designs for a two-stage poppet valve system with a simple back-side pipeline condition that may be used in a valve stack to create ...
Nonlinear mechanics and testing of highly flexible one-dimensional structures using a camera-based motion analysis system
(University of Missouri--Columbia, 2006)
Both experimental and theoretical investigations are conducted for the dynamics of cables and strings. The exact equations of motion for finite but small amplitude vibration of string were derived based on a fully nonlinear ...
Applying and analyzing robust modern control on uncertain hydraulic systems
(University of Missouri--Columbia, 2006)
In this work modern robust control systems are designed and compared to standard techniques for a hydraulic implement system. The system includes an independent metering valve (IMV) and a variable displacement pump. The ...
Blackbody temperature calculations from visible and newa-IR spectra for gas-fired furnaces
(University of Missouri--Columbia, 2005)
The goal of this research work is to develop a system capable of measuring multiple factors of interest in the operation of gas-fired furnaces. The primary focus is the development of a model for calculating wall or flame ...
Nonlinear control and active damping of a forced-feedback metering poppet valve
(University of Missouri--Columbia, 2007)
For a metering poppet valve which was developed at the University of Missouri (MU valve), the valve can be configured for performance at the cost of stability. It is desirable to achieve both performance and stability using ...
Neutron diffraction study of load response and residual stresses in WC-(Ni/Co) composites
(University of Missouri--Columbia, 2005)
The in-situ response of WC-Ni and WC-Co composites under compressive loading was measured using neutron diffraction techniques. These measurements give a clear indication of the elastic strain behavior of both the carbide ...
A development of the motile sperm sorting microfluidic devices
(University of Missouri--Columbia, 2007)
The objectives of this research are developing and improving an inexpensive and convenient microfluidic device to apply to sperm cell sorting. Based on well known soft-lithography fabrication method which contains rapid ...