Search
Now showing items 1-20 of 291
Investigation of fanless PCs : design and optimization
(University of Missouri--Columbia, 2009)
The purpose of this research is to fundamentally explore the limitations of natural convection as it pertains to the cooling of desktop personal computers (PCs) and, in particular, maximize total thermal loads while ...
Blackbody temperature calculations from visible and newa-IR spectra for gas-fired furnaces
(University of Missouri--Columbia, 2005)
The goal of this research work is to develop a system capable of measuring multiple factors of interest in the operation of gas-fired furnaces. The primary focus is the development of a model for calculating wall or flame ...
Signal processing techniques for nonlinearity identification of structures using transient response
(University of Missouri--Columbia, 2009)
In this work, an alternate method for determining nonlinearity of vibrating structures is investigated. In contrast to previous approaches, transient vibrations have been used in combination with advanced signal processing ...
Kinematic analysis of cam profiles used in compound bows
(University of Missouri--Columbia, 2009)
The first compound bow was invented in Missouri in 1969. [Allen, 1968] Compound bows are uniquely different from other types of bows in that they use a set of cables, cams and pulley, and two elastic limbs that act as ...
Analysis and modeling of direct selective laser sintering of two-component metal powders
(University of Missouri--Columbia, 2005)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Direct Selective Laser Sintering (SLS) is an emerging technology of Solid Freeform Fabrication (SFF) that 3-D parts are built from the metal-based ...
Characterization of drillability of sandwich structure of carbon fiber reinforced epoxy composite over titanium alloy
(University of Missouri--Columbia, 2006)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Composite-over-Titanium structures are the major candidates for substitution of conventional materials in aerospace industries. This paper investigates ...
Nanomechanical property characterization of femoral head materials
(University of Missouri--Columbia, 2006)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Orthopedic Implants under long-term physiological loading could produce changes in the surface mechanical properties and possible failure. The knowledge ...
Galilean moon tour using simplified trajectory computational techniques
(University of Missouri--Columbia, 2006)
It is desired to find a trajectory for a spacecraft that will capture into an orbit about Jupiter and then subsequently capture into an orbit about each of the Galilean moons. The two main variables are the mass ratio, ...
Theoretical and experimental investigation of oscillating heat pipes
(University of Missouri--Columbia, 2006)
A mathematical model describing the oscillation characteristics of slug flow in a capillary tube is presented. The model considers the vapor bubble as the gas spring for the oscillating motions in a capillary tube including ...
Experimental investigation of nanofluid oscillating heat pipes
(University of Missouri--Columbia, 2006)
An experimental investigation was conducted of oscillating heat pipes (OHP) charged with diamond nanofluid. By combining the high thermal conductivity of nanofluids with the high heat transport rate of OHPs, a new type of ...
A single-sided access simultaneous solution of acoustic wave speed and sample thickness for isotropic materials of plate-type geometry
(University of Missouri--Columbia, 2006)
In ultrasonic nondestructive evaluation, acoustic waves are used to inspect and characterize materials. Two commonly measured parameters are material thickness and acoustic wave speed in the material. These parameters are ...
Modern control design for a variable displacement hydraulic pump
(University of Missouri--Columbia, 2006)
In this work modern control methods are used to design and analyze control methods for a variable-displacement hydraulic pump. More accurate uncertainty descriptions are derived by using a structured uncertainty model as ...
Modeling, design and control of forced-feedback metering poppet valve system
(University of Missouri--Columbia, 2006)
This research explores valve design, dynamic modeling, and techniques to achieve flow control for a forced-feedback metering poppet valve system. In particular, nonlinear and linear models of a forced feedback configuration ...
A study of parametric excitation applied to a MEMS tuning fork gyroscope
(University of Missouri--Columbia, 2007)
The current MEMS ( gyroscopes which normally use the electro static force to excite the comb drive are faced with the limitations such as low precision, coupling problem, and poor robustness. We propose to use parametric ...
Experimental and analytical study on two-phase impingement cooling with and without electric field
(University of Missouri--Columbia, 2007)
Among the thermal management solutions for power electronics, two-phase jet or spray impingement cooling are two promising candidates. In this study, electrohydrodynamic atomization (EHDA) method is used to generate spray ...
Failure of transparent polymer composite laminated glass panels under impact loading
(University of Missouri--Columbia, 2007)
Historically, windows and other facilities during hurricanes have experienced significant damage exposing the occupants and the building envelope to uncomfortable and dangerous conditions. A new approach to the design of ...
Parametric and optimal design of modular machine tools
(University of Missouri--Columbia, 2007)
Over the years machine tools for manufacturing have developed into two classes. One is the general purpose machine tools, and the other is designed for machining large quantities of a specific part or process. These ...
Development of tailored preform processing technology for net-shape manufacturing of large monolithic structures
(University of Missouri--Columbia, 2007)
The aim of the present research effort involves exploration of a new processing approach, "Tailored Preform Processing (TPP)" technology for net-shape manufacturing of monolithic structures for the transportation industry. ...
State space formulation of TFEA & uncharted islands of instability in milling
(University of Missouri--Columbia, 2007)
A new approach is developed to examine the stability of delay differential equations that builds upon the previous work in temporal finite element analysis. In contrast to the results of previous work, which could only be ...
Modeling of selective laser sintering of single-component metal powders
(University of Missouri--Columbia, 2006)
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] Selective Laser Sintering (SLS) is a rapid prototyping technology which enables freeform fabrication of complex-geometry components directly from ...