Browsing 2011 MU dissertations - Freely available online by Thesis Department "Mechanical and aerospace engineering (MU)"
Now showing items 1-5 of 5
-
Chatter detection and prevention in high-speed milling
(University of Missouri--Columbia, 2011)In this work, two separate mathematical models, a traditional and new model, are presented for an end-milling process. The traditional model assumes circular tool motion, while the new model accounts for trochoidal tool ... -
A comprehensive simulation-based methodology for the design and optimization of orthopaedic internal fixation implants
(University of Missouri--Columbia, 2011)Internal fixation implants are widely used by orthopaedic surgeons to stabilize various types of fractures in injured patients. However, the irregular geometry of the human skeletal system, as well as the significant ... -
Evaluation of novel hovering strategies to improve gravity-tractor deflection merits
(University of Missouri--Columbia, 2011)The gravity-tractor (GT) consists of a spacecraft hovering inertially over a small asteroid. This equilibrium state is achieved by the action of a pair of engines that balance the gravitational acceleration. Due to Newton's ... -
Fabrication and characterization of heat flux sensor using polymer derived ceramics
(University of Missouri--Columbia, 2011)In this study, a free standing Resistance Temperature Detector (RTD) sensor made from Polymer Derived Ceramics (PDCs) for high temperature application (above 1000[degrees]C) is fabricated. A newly developed fabrication ... -
Testing the pressure transient flow-force for spool-type two-way valves
(University of Missouri--Columbia, 2011)An analysis is presented of the flow force acting on a two-way valve using the equilibrium condition of the piston and the equilibrium condition of fluid in the control volume. Three types of flow forces are identified: ...